Futaba T6K V2 - 8 Channel Combo (TX/RX)
Product Code: CB6K/L
RRP: £199.99
£ 179.99

Specification

  • 8 Channel
  • Futaba 2.4GHz (T-FHSS, S-FHSS)
  • Model Memory: 30
  • S.BUS: S.Bus & S.Bus2
  • Receiver: Futaba R3006SB 2.4GHz T-FHSS (Inc.)

With the latest V2.0 software update the T6K is now capable of operating up to 8 channels alongside a selection of extra features.
The new Futaba T6K is the perfect entry/sport level radio for aircraft and helicopter pilots. This stylish, stealth looking transmitter features a clean in-built aerial, easy jog dial programming and a backlit LCD screen for ease of use, however the T6K is not only about style, it also includes many features you would normally expect in high-end transmitters.
Designed to take full advantage of Futaba's popular T-FHSS telemetry system so a wide array of data can be monitored in flight (on screen or using the in-built speaker) including as standard receiver battery voltage and external battery voltage, whilst temperature, RPM, altitude and even a variometer sensors are available as options . The T6K is also capable of using S.Bus/S.Bus2 servos which can be easily programmed via the transmitter, whilst these and standard servos can all be used with the supplied R3006SB receiver.

 

  • S-FHSS/T-FHSS selectable
  • Telemetry system (T-FHSS) with data speech function for monitoring receiver battery voltage, external voltage, temperature, RPM, altitude and variometer
  • Built-in antenna
  • S.Bus/S.Bus2 servo setting functions programmable through the transmitter
  • Preset vibration alarms
  • 30 model memory
  • 8-character model/user naming
  • Programmable mixes for airplanes, helicopters, gliders and multi-rotors
  • Digital trims with variable step settings
  • Adjustable stick length and tension
  • Changeable switch/VR position and AUX channel function
  • Throttle position warning
  • Backlit 128x64 DOT LCD screen with adjustable display contrast
  • Software updateable through the CIU-2
  • Screen Lock
  • Earphone/S.Bus/Trainer jacks
  • Assignable switches (three 3-position, one 2-position)
  • Range Check
  • Program navigation bay with jog dial, +/- pads and end pad
  • Data reset
  • Model copy
  • Selectable model type
  • Fail Safe
  • End Points
  • Trim/Trim Resets/Trim Steps
  • Sub Trim
  • Servo Reversing
  • Parameter functions
  • Servo monitor/Test
  • Wireless model data transfer
  • Timer-System and Model (Up/Down)
  • Trainer system

Airplane Functions

  • Wing Type (5-wing, 2-tail)
  • Throttle Cut
  • Dual Rate/Expo
  • Throttle Curve
  • Idle down
  • Gyro
  • Aileron differential
  • V-Tail
  • Camber
  • Air Brake
  • Elevator-to-Flap mixing
  • Flap-to-Elevator mixing
  • Elevon mixing

Glider Functions

  • Wing Type (5-Wing, 2-Tail)
  • Condition select
  • Dual Rate/Expo
  • Motor switch
  • Gyro
  • Aileron Differential
  • V-tail
  • Butterfly mixing
  • Trim mixing
  • Elevator-to-Camber mixing
  • Camber mixing
  • Aileron-to-Camber mixing

Helicopter Functions

  • Swash type (6)
  • Condition Select
  • Throttle Cut
  • Dual Rate/Expo
  • Trim Offset
  • Delay
  • Gyro mixing
  • Swash AFR
  • Swash mixing
  • Throttle Curve (5-point)
  • Pitch Curve (5-point)
  • Pitch-to-Rudder mixing
  • Throttle Hold
  • Hovering throttle
  • Hovering pitch

Multicopter Functions

  • Flight Mode
  • Center alarm
  • Dual Rate/Expo
  • Throttle Curve
  • Throttle Delay
  • Gyro

What's in the Box

  • 1 x Futaba T6K V2
  • 1 x Futaba R3006SB 2.4GHz T-FHSS
  • 1 x Instruction Manual

Required for use: 4x 'AA' batteries for transmitter & suitable Rx battery

Customer Reviews (0)