All Electric RC View CartCheckout  | About Us | Contact Us 
Home
Coming Soon
Special Offers
Aircraft Kits
Brushless Motors
Chargers Balancers
Speed Controllers
Aircraft Batteries
Flight Accessories
Electric Helicopters
Radio Equipment
IC Engines
Aircraft Propellers
Cars & Buggys
Covering & Glues
Search

Shopping Cart
ItemQtyPrice

Sub Total: £0.00
Delivery: £0.00
Total: £0.00



 

Vortex Outrunner Motors

Vortex Inrunner Motors


Categories
  Home > Aircraft Kits > ST MODEL >

ST Models MX2 EP PIP (SPORTS)

ST Models MX2 EP PIP (SPORTS)


Specification

  • Wingspan: 1210mm (47.6in)
  • Length: 1106mm (43.5in)
  • Weight: 960g (33.8oz) Typical
  • Wing Area: 27.3dm2 (423.2 sq.in)
  • Wing Loading: 35.16 g/dm2 (11.5 oz.sq.in)
  • LiPo: 3S 2100mAh 20C Recommended

Want a sports aerobatic model that is economic to buy, economic to operate and stunning to fly? You've just found it!

The ST Models MX-2 is based on the full size, aerobatic aircraft of the same name and then modified for model flying characteristics.

Supplied complete with powerful 920Kv brushless motor, 12 x 5 propeller, a 30A brushless ESC, four powerful new 9g servos and with them all pre-installed. All that is needed is 30 minutes of final assembly and applying the stunning colour decals.

Setups are provided for both sports and 3D flying (even mixes). For serious 3D pilots, the movements make maneouvres like static loops, rolls and the 'waterfall' and 'parachute' quite within your reach.

To provide that 3D control power with precision has been achieved with a totally new servo amplifier to give high resolution and holding power combined with strong torque. The control pushrods are kept short by placing each servo close to the surface it is operating.

Using a 3S 2100-2500mAh Li-Po, there is enough power to hover vertically with ease and then punch out straight up! The choice of a 12 x 5 propeller limits the 'torque' turn effect and eases current consumption by matching the load and motor power/Kv rating effectively. Torque rolss are possible in both directions. Access to the battery is via a clip-in underside hatch, simple!

Like all ST models, the airframe is moulded accurately in 'ding' resistant EPO foam. The wings are removable by slackening just two screws and sliding them off the tubular carbon spar tube. Great for compact transportation. Access to the radio compartment requires pulling off the clip-on canopy moulding.

The tough, aluminium undercarrige soaks up those landings on our club patches so well, but the model is hardly moving forward anyway!

As a model to hone your aerobatic skills or just cruise around on a Sunday afternoon, the ST Models MX-2 is hard to beat.

And it looks 'cool' too!




Our Price: £109.99

Low Stock Level Please Check Avalability

Related Products
R617FS/2-4GR617FS/2-4G
£62.99
ECO 2200mah 11.1V 20C Li-poly Battery Pack W/T-connectorECO 2200mah 11.1V 20C Li-poly Battery Pack W/T-connector
£24.99
AR500 DSM2 5 Channel Sport ReceiverAR500 DSM2 5 Channel Sport Receiver
£36.99


« Back

WOT 4 Foam 'e'

Now in stock

Seagull Christen Eagle 53"


Events

You will find us at the following shows:-

Chester Electric Fly In July 18th


Special Offers

Super Micro 7.5g Servo

£5.99

Super Micro 6g Servo

£5.99

Super Micro Digital 7.5g Servo

£6.49


Etronix Chargers


Site Map | Terms & Conditions
All Electric RC - Your Local Electric RC Flight Specialist