6-Channel DSM2 Receiver SBUS610E (JR/SPEKTRUM Compatible)
£19.99
- Type: 6-Channel Full-Range DSM2 Receiver
- 1 channel SBUS output (Not Used)
- Modulation: DSM2
- Band: 2.4GHz
- Dimensions (L x W x H): 50 x 30 x 3mm
- Weight: 8g
- Voltage Range: 3.6-9.6v
- Antenna Length Main RX: 30mm*2
- Compatibility (Spektrum and JR DSM2 and DSMX): DX6I,DX7,DX8,DSX9 DSX11,DSX12
Binding Procedure
1. Put the binding harness into connector location marked BIND. Next apply power to the receiver.
2. To set fail-safe throttle, (minimum throttle and all control surfaces set to neutral is suggested). Press and hold the bind button of transmitter (LED will illuminate), Turn on the transmitter.
3. Receiver LED will change from rapid flashing to slow flashing and a few seconds later when bind is accomplished the LED will illuminate solid. Fail-safes should be programmed correctly now.
4. Remove binding harness from the BIND channel. Restart the receiver by cycling it power off and turn on. All channels should function properly now. You may test fail-safe by cycle transmitter on and off. The throttle should return to your preset fail-safe positions.
General Notes: This is not a Spektrum receiver, nor is it a copy of a Spektrum Receiver.
The Spektrum brand is a trademark of Horizon Hobbies USA.
